Quadex Hyperform Fast Curing Hydraulic Cement Manhole Wall and Sewer Pipe Repair, 60lb Bag

Special Price $36.16 Regular Price $39.78
SKU
QUAD-HF-60

Features

  • RECOMMENDED FOR - Filling large voids in manhole walls, reconstructing inverts, concrete repair and patching, building benches and filling voids
  • FAST AND STRONG - Hyperform® is a one component, rapid setting, high early strength patching material designed for repairing vertical and horizontal concrete and masonry structures.
  • PERFORMANCE CHARACTERISTICS - Comprehensive Strength ASTM C39, Bond Strength ASTM C882 and Shrinkage ASTM C596
  • SPECS - 60 lb. bag covers 48 cubic ft. 11.5 sq. ft of coverage at 500 mils (1/2")
  • COMPRESSION STRENGTH - 2,500 PSI at 1 hour and fully cured after 28 days with compression strength of 7,000 PSI
  • APPLICATION - Ready to use just add water, trowel to apply
  • LONG-LASTING - Excellent resistance to freeze & thaw

Quadex Hyperform Fast Curing Hydraulic Cement Manhole Wall and Sewer Pipe Repair, 60lb Bag
Hyperform by Quadex is a one component, rapid-setting, high early strength patching material designed for repairing vertical and horizontal concrete and masonry structures. With invert lining, flow can be released with 25-30 minutes post mixing. Prepare surface to be patched by removing all loose concrete using an air or electric hammer. After area is completely free of contaminants, trowel apply. Filling large voids in manhole walls, reconstructing inverts, catch basins and pipe repair. One 60-lb. bag of Hyperform will yield approximately .48 cu. ft. and will cover 11.5 sq. ft. at a 1/2 in. thickness.

FEATURES AND BENEFITS:

  • Rapid-setting
  • High early and ultimate strengths
  • Non-Shrinking
  • No Calcium Chloride
  • Ready to use, just add water
  • Excellent resistance to freeze thaw

APPLICATION INFORMATION
Prepare surface to be patched by removing all loose concrete by using an air or electric hammer. Next, sandblast or water blast surface to clean away all contaminants, such as oil, chemicals, or dust. Then rinse with potable water to remove all remaining dirt, sand and loose debris. Mix Hyperform with clean potable water at a rate of 1.0 gallon | 3.78 liter per 60 lb. | 27.2 kg. bag. If needed, Hyperform can be extended with 3/8 in. | 9.5 mm aggregate at a rate of 25 lb. | 11.34 kg. per bag.

PRECAUTIONS
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Hyperform should wear necessary eye protection, dust mask and rubber gloves.Read all product labels and technical literature.

WARRANTY
Quadex, LLC warrants its products to be free of defects in material and workmanship. Within one year from purchase, if any Quadex, LLC product is proven defective, the company will replace said product or refund its purchase price at its sole discretion. The company’s obligation shall be limited solely to such replacement or refund. There are no other warranties by Quadex, LLC, expressed or implied. There is no warranty if Quadex products are used contrary to Quadex, LLC’s written directions.

TYPICAL PERFORMANCE CHARACTERISTICS

  • Compressive Strength (ASTM C39)
    • 30 minutes >1,200 psi | 8.27 MPa 1 hour >2,500 psi | 17.24 MPa
    • 1 day >4,000 psi | 27.58 MPa
    • 28 days >7,000 psi | 48.26 MPa
  • Bond Strength (ASTM C882)
    • 28 day >3,000 psi | 20.68 MPa
  • Shrinkage (ASTM C596)
    • 28 Days ≤ 0.02%

    * The values stated in inch-pound units are to be regarded as the standard. The values given in International System are for information only.

More Information
Model QUAD-HF-60
Brand Quadex
Product Category Epoxy Coatings
Industry Application Coatings
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account