Quadex™ Chimney Guard - 2 Bucket Kit
$209.00
SKU
QUAD-CG-KIT
Quadex Chimney Guard - Flexible Manhole Cimney Coating
- Two Component Kit
- Pre-measure Kit (Price is per kit)
- 270% elongation
- Self Priming
- One kit designed for 2 ft x 2 ft structure at 100 mils 91/10"
- Applied with trowel
- Designed for steel and masonry structures
- High cuild monolithic coating / 100 mils per coat
- One step, durable chimney seal
- Superior adhesion to steel, concrete and brick
- Permanent flexibility at how temperature
- Extended work time
Related Products
Check items to add to the cart or
Quadex Chimney Guard
Quadex Chimney Guard™ is a 100% solids Epoxy/Urethane hybrid designed to provide a highly flexible and securely bonded seal prepared to address heavy traffic loading, extreme freeze thaw and infiltration..
SURFACE PREPARATION
Concrete: Existing concrete must be hydro blasted using a turbo tip at 4000psi until all loose concrete is removed. New concrete must be cured for 28 days prior to application of Chimney Guard. Abrasive blast, in accordance to SSPC-SP13/NACE 6, must be performed prior to application of Chimney Guard.
Steel: Near-White Blast SSPC-SP10/NACE 2. Sandblasting is required when applying Chimney Guard to manhole frame.
All surfaces must be clean and free from oil, grease and other contaminants!
APPLICATION
Fill all voids and cracks greater that 1/8 inch with Quadex Hyperform™. Wait one hour before applying Chimney Guard. Quadex AluminaLiner will need a full 24-hour cure prior to the application of Chimney Guard. Quadex GeoKrete® and QM-1s™ will need a full 5-day cure prior to the application of Chimney Guard. When Quadex Structure Guard® has been used to line the manhole, Chimney Guard can be applied directly to Structure Guard within 8 hours, or as soon as Structure Guard has become tack free. After 8 hours, Structure Guard must be abraded with 80 grit sand paper before applying Chimney Guard.
APPLICATION METHOD
Chimney Guard was developed to be trowel applied for optimum performance.
Quadex Chimney Guard™ is a 100% solids Epoxy/Urethane hybrid designed to provide a highly flexible and securely bonded seal prepared to address heavy traffic loading, extreme freeze thaw and infiltration..
SURFACE PREPARATION
Concrete: Existing concrete must be hydro blasted using a turbo tip at 4000psi until all loose concrete is removed. New concrete must be cured for 28 days prior to application of Chimney Guard. Abrasive blast, in accordance to SSPC-SP13/NACE 6, must be performed prior to application of Chimney Guard.
Steel: Near-White Blast SSPC-SP10/NACE 2. Sandblasting is required when applying Chimney Guard to manhole frame.
All surfaces must be clean and free from oil, grease and other contaminants!
APPLICATION
Fill all voids and cracks greater that 1/8 inch with Quadex Hyperform™. Wait one hour before applying Chimney Guard. Quadex AluminaLiner will need a full 24-hour cure prior to the application of Chimney Guard. Quadex GeoKrete® and QM-1s™ will need a full 5-day cure prior to the application of Chimney Guard. When Quadex Structure Guard® has been used to line the manhole, Chimney Guard can be applied directly to Structure Guard within 8 hours, or as soon as Structure Guard has become tack free. After 8 hours, Structure Guard must be abraded with 80 grit sand paper before applying Chimney Guard.
APPLICATION METHOD
Chimney Guard was developed to be trowel applied for optimum performance.
| Model | QUAD-CG-KIT |
|---|---|
| Brand | Quadex |
| Product Category | Epoxy Coatings |
| Industry Application | Coatings |
Write Your Own Review